No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an OUI for a Voice VLAN

Configuring an OUI for a Voice VLAN

Context

An OUI is the first 24 bits of a 48-bit MAC address assigned to each vendor by the Institute of Electrical and Electronics Engineers (IEEE). Voice packets sent by IP phones can be identified by the MAC address ranges requested by IP phone vendors.

In voice VLAN, the OUI is user-defined and not necessarily 24 bits long. The OUI is the result of the AND operation between the MAC address and mask in the voice-vlan mac-address command.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run voice-vlan mac-address mac-address mask oui-mask [ description text ]

    An OUI is configured for a voice VLAN.

    By default, no OUI address is set.

    When configuring an OUI for a voice VLAN, note the following:

    • The MAC address cannot be all 0s, multicast address, or broadcast address.

    • The system supports a maximum of 100 OUIs. When the system is configured with 100 OUIs, subsequent configurations will not take effect.

    • When you run the undo voice-vlan mac-address mac-address command to delete an OUI, set mac-address to the result of the logical AND operation between the OUI and the OUI mask that you set.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 288850

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next