No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Port Priority in an MSTI

(Optional) Configuring a Port Priority in an MSTI

Context

During spanning tree calculation, port priorities in MSTIs determine which ports are selected as designated ports.

To block a port in an MSTI to eliminate loops, set the port priority to a value larger than the default value. This port will be blocked during designated port selection.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The Ethernet interface view is displayed.

  3. Run stp instance instance-id port priority priority

    A port priority is set in an MSTI.

    By default, the port priority is 128.

    The priority value ranges from 0 to 240, in increments of 16.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 287038

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next