No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for HVRP

Licensing Requirements and Limitations for HVRP

Involved Network Elements

Other network elements also need to support HVRP.

Licensing Requirements

HVRP is a basic feature of a switch and is not under license control.

Version Requirements

Table 21-1  Products and versions supporting HVRP

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10
S9700

S9703, S9706, S9712

V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10

Feature Limitations

  • After HVRP is enabled, the system dynamically sets the MAC address learning mode in a VLAN. Therefore, you do not need to set the maximum number of MAC addresses that can be learned in the VLAN.

  • HVRP and GVRP cannot be enabled simultaneously.
  • When you configure HVRP attributes, it is recommended that you delete the default VLAN (VLAN 1) from an interface.

  • After HVRP is disabled globally, HVRP is disabled on all the interfaces.

  • After HVRP is disabled on an interface, all HVRP-related configurations such as the VLAN registration timers become invalid.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 287385

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next