No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Super-VLAN

Creating a Super-VLAN


A super-VLAN consists of several sub-VLANs. No physical interface can be added to a super-VLAN, but a VLANIF interface can be configured for the super-VLAN and an IP address can be assigned to the VLANIF interface.


  1. Run system-view

    The system view is displayed.

  2. Run vlan vlan-id

    A VLAN is created and the VLAN view is displayed.

    The VLAN ID of a super-VLAN must be different from each sub-VLAN ID.

  3. Run aggregate-vlan

    A super-VLAN is created.

    A super-VLAN cannot contain any physical interfaces.

    VLAN 1 cannot be configured as a super-VLAN.

  4. Run access-vlan { vlan-id1 [ to vlan-id2 ] } &<1-10>

    A sub-VLAN is added to a super-VLAN.

    Before adding any sub-VLANs to a super-VLAN, ensure that they are not configured with VLANIF interfaces.

    If too many sub-VLANs are added to the super-VLAN, the ARP broadcast storm degrades the system performance and affects the ARP learning. The number of sub-VLANs that are added to a super-VLAN cannot exceed 50.

    The super-VLAN cannot be used with Layer 3 multicast.

Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 285625

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next