No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring 2:1 VLAN Mapping

Configuring 2:1 VLAN Mapping

Context

When receiving a tagged packet, an interface maps the VLAN ID in the packet to an S-VLAN ID.

NOTE:

The ES0D0G24SA00 and ES0D0G24CA00 cards of the S7700, and the EH1D2S24CSA0 and EH1D2G24SSA0 cards of the S9700 do not support VLAN mapping for double-tagged packets.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run port link-type { hybrid | trunk }

    The port link-type is set.

  4. Run port vlan-mapping vlan vlan-id1 inner-vlan vlan-id2 [ to vlan-id3 ] map-vlan vlan-id4 [ remark-8021p 8021p-value ]

    The outer VLAN tag is replaced.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 288112

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next