No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Prevent Terminals' Failures to Ping the Gateway or Low Speed in Obtaining IP Addresses When They Connect to an STP Network?

How Do I Prevent Terminals' Failures to Ping the Gateway or Low Speed in Obtaining IP Addresses When They Connect to an STP Network?

Terminal devices such as servers or network management workstations do not support STP. However, STP is enabled on switch interfaces by default. An STP interface enters the Forwarding state 30 seconds after it changes to the Up state. If an interface alternates between Up and Down states, the terminal connected to the interface will fail to communicate with the gateway or spends a long time to obtain an IP address.

To solve this problem, configure interfaces connected to terminals as edge ports or disable STP on the interfaces.

To ensure availability and security, you are advised to configure the port as an STP edge port. This is because when a loop occurs on a terminal device connected to an edge port, the port automatically switches to a non-edge port and enables the loop breaking function of STP.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 284962

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next