No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of MSTP Configuration Tasks

Summary of MSTP Configuration Tasks

Table 15-6 lists the configuration task summary of MSTP.

Table 15-6  MSTP configuration tasks
Task Description Reference

Configure basic MSTP functions.

MSTP is commonly configured on switches to trim a ring network to a loop-free network. Devices start spanning tree calculation after the working mode is set and MSTP is enabled. Use any of the following methods if you need to intervene in the spanning tree calculation:
  • Manually configure the root bridge and secondary root bridge.
  • Set a priority for a switch in an MSTI.
  • Set a path cost for a port in an MSTI.
  • Set a priority for a port in an MSTI.

Configuring MSTP

Configure MSTP multi-process.

On a network deployed with Layer 2 single-access rings and multi-access rings, configure multiple MSTP processes so that spanning trees of different processes are calculated independently and do not affect each other.

Configuring MSTP Multi-Process

Configure MSTP parameters on an interface.

Setting optimal MSTP parameters achieve rapid convergence.

Configuring MSTP Parameters on an Interface

Configure MSTP protection functions.

You can configure one or more functions.

Configuring MSTP Protection Functions

Configure MSTP interoperability between Huawei devices and non-Huawei devices.

To communicate with a non-Huawei device, set proper parameters on the MSTP-enabled Huawei device.

Configuring MSTP Interoperability Between Huawei and Non-Huawei Devices

Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 296164

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next