No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling HVRP on an Interface

Enabling HVRP on an Interface


An interface enabled with HVRP is an HVRP interface. VLAN registration and aging can be performed only on HVRP interfaces.

  • When you configure HVRP attributes on an interface, it is recommended that you delete the default VLAN (VLAN 1) from the interface.

  • After HVRP is disabled globally, HVRP is disabled on all interfaces.

  • After HVRP is disabled on an interface, all HVRP-related configurations such as the VLAN registration timers become invalid.

  • The PVID of the interface is not aged.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run hvrp enable

    HVRP is enabled on the interface.

    By default, HVRP is disabled on an interface.

Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 296903

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next