No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling HVRP Globally

Enabling HVRP Globally


Through dynamic VLAN registration and aging mechanisms, HVRP ages the VLANs that do not forward packets on interfaces and saves only necessary VLANs. When a VLAN contains at most two interfaces, the interfaces do not learn MAC addresses, data packets are broadcast in the VLAN and no extra bandwidth is consumed.

  • When STP works in VBST mode, do not enable HVRP. When HVRP is enabled, do not change the working mode of STP to VBST.
  • When the VCMP role is the client or server, HVRP cannot be enabled. In this case, run the vcmp role command to configure the VCMP role as silent or transparent. If HVRP has been enabled, do not switch the VCMP role to client or server.
  • After HVRP is enabled, the switch dynamically sets the MAC address learning mode for the VLAN. Therefore, you do not need to set the maximum number of MAC addresses that can be learned in the VLAN.

  • HVRP and GVRP cannot be enabled simultaneously.


  1. Run system-view

    The system view is displayed.

  2. Run hvrp enable

    HVRP is enabled globally.

    By default, HVRP is disabled globally.

Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 299829

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next