No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of STP/RSTP Configuration Tasks

Summary of STP/RSTP Configuration Tasks

Table 14-12 summarizes STP/RSTP configuration tasks.

Table 14-12  STP/RSTP configuration tasks
Scenario Description Task

Configuring basic STP/RSTP functions

Configure STP/RSTP on switching devices on a network to trim the network into a tree topology free from loops.

Configuring STP/RSTP

Setting STP parameters that affect STP convergence

STP cannot implement rapid convergence. However, you can set STP parameters, including the network diameter, timeout interval, Hello timer value, Max Age timer value, and Forward Delay timer value to speed up convergence.

Setting STP Parameters That Affect STP Convergence

Setting RSTP parameters that affect RSTP convergence

RSTP supports link type and fast transition configuration on ports to implement rapid convergence.

Setting RSTP Parameters that Affect RSTP Convergence

Configuring RSTP protection functions

You can configure one or more functions RSTP protection functions on a Huawei device.

Configuring RSTP Protection Functions

Setting parameters for interoperation between Huawei and non-Huawei devices

To implement interoperation between a Huawei device and a non-Huawei device, select the fast transition mode based on the Proposal/Agreement mechanism of the non-Huawei device.

Setting Parameters for Interoperation Between Huawei and Non-Huawei Devices

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 288892

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next