No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Association Between SEP and VPLS

Association Between SEP and VPLS

Association between SEP and VPLS can be configured on the edge devices of a SEP network to enable the VPLS network to detect any topology change of the SEP network. If the SEP network topology changes, the edge devices send MAC Withdraw packets to the VPLS network. After receiving the MAC Withdraw packets, devices on the VPLS network update their MAC address entries and ARP entries to ensure reliable traffic transmission.

Figure 17-16 shows a networking of association between SEP and VPLS.

Figure 17-16  Association between SEP and VPLS

In Figure 17-16, a CE is connected to a VPLS network through an open ring network. SEP is enabled on the open ring network to eliminate redundant links. If a link on the ring network becomes faulty, SEP can quickly restore the communication between nodes on the ring network.

Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 285100

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next