No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for GVRP

Licensing Requirements and Limitations for GVRP

Involved Network Elements

Other network elements are not required.

Licensing Requirements

GVRP is a basic feature of a switch and is not under license control.

Version Requirements

Table 12-1  Products and versions supporting GVRP

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10

S9700

S9703, S9706, S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • When many dynamic VLANs need to be registered or the network radius is large, using default values of timers may cause VLAN flapping and high CPU usage. In this case, increase values of the timers. The following values are recommended depending on the number of VLANs.
    Table 12-2  Relationship between GARP timer values and number of dynamic VLANs that need to be registered

    Timer

    Number of Dynamic VLANs to Be Registered (N)

    N ≤ 500

    500 < N ≤ 1000

    1000 < N ≤ 1500

    N > 1500

    GARP Hold timer

    100 centiseconds (1 second)

    200 centiseconds (2 seconds)

    800 centiseconds (8 seconds)

    1000 centiseconds (10 seconds)

    GARP Join timer

    600 centiseconds (6 seconds)

    1200 centiseconds (12 seconds)

    4000 centiseconds (40 seconds)

    6000 centiseconds (1 minute)

    GARP Leave timer

    3000 centiseconds (30 seconds)

    6000 centiseconds (1 minute)

    20000 centiseconds (3 minutes and 20 seconds)

    30000 centiseconds (5 minutes)

    GARP LeaveAll timer

    12000 centiseconds (2 minutes)

    24000 centiseconds (4 minutes)

    30000 centiseconds (5 minutes)

    32765 centiseconds (5 minutes and 27.65 seconds)

  • The blocked port in instance 0 of STP/RSTP/MSTP can block GVRP packets; the blocked ports of other MSTIs and other ring network protocols such as ERPS, SEP, RRPP, Smart Link, and VBST cannot block GVRP packets. To ensure that GVRP runs normally and prevent GVRP loops, do not enable GVRP on the blocked port of a ring network protocol.
  • The blocked ports of LDT and LBDT cannot block GVRP packets. To ensure that GVRP runs normally and prevent GVRP loops, do not enable GVRP on the blocked port of LDT and LBDT.
Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 285640

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next