No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reverse Tunnel

Reverse Tunnel

When basic OAM is configured, the LSP to be detected must be bound to a reverse tunnel for it to transmit BDI packets.

BDI packets are transmitted through the reverse tunnel. The reverse tunnel can be one of the following:

  • An LSP with the ingress and egress being opposite to those on the detected LSP
  • A non-MPLS path that connects the ingress and the egress of the detected LSP

The reverse tunnel transmitting BDI packets can be one of the following types:

  • Private reverse LSP

  • Shared reverse LSP

  • Non-MPLS reverse path

NOTE:

Huawei devices can only use a TE tunnel as the reverse tunnel.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 118482

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next