No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Static LSP Configuration

Verifying the Static LSP Configuration


The configurations of the static LSP function are complete.


  • Run the display default-parameter mpls management command to check default configurations of the MPLS management module.
  • Run the display mpls static-lsp [ lsp-name ] [ { include | exclude } ip-address mask-length ] [ verbose ] command to check the static LSP.
  • Run the display mpls label static available [ [ label-from label-index ] label-number label-number ] command to check information about labels available for transmitting static services.
Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 123325

Downloads: 89

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next