No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing the Operation Information

Clearing the Operation Information


Cleared statistics cannot be restored. Exercise caution when you use the command.


  • Run the reset mpls rsvp-te statistics { global | interface [ interface-type interface-number ] } command in the user view to clear statistics about RSVP-TE.
  • Run the reset mpls stale-interface [ interface-index ] command in the user view to delete the information about MPLS interfaces in the Stale state.
  • Run the reset mpls te statistics tunnel-interface tunnel interface-number command to clear statistics on TE tunnel interfaces that change from Up to Down.
Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 117374

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next