No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Modifying Basic Time

(Optional) Modifying Basic Time

Context

After an active/standby switchover starts, an RSVP GR node has an RSVP smoothing period, during which the data plane continues forwarding data if the control plane is not restored. After RSVP smoothing is completed, a restart timer is started.

Restart timer value = Basic time + Number of ingress LSPs x 60 ms + Number of none-ingress LSPs x 15 ms

In this formula, the default basic time is 90 seconds and is configurable by using a command line, and the number of LSPs is the number of LSPs with the local node being the ingress.

After the restart timer expires, the recovery timer is started.

Recovery timer = Restart time + Total number of LSPs x 40 ms

Perform the following configurations on a GR node.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-te hello basic-restart-time basic-restart-time

    The RSVP GR basic time is modified.

    By default, the RSVP GR basic time is 90 seconds.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 117866

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next