No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RSVP GR

Configuring RSVP GR

RSVP GR prevents service interruptions during an active/standby switchover and allows a dynamic CR-LSP to be restored.

Pre-configuration Tasks

Before configuring RSVP GR, complete the following tasks:

Configuration Procedure

Enabling the RSVP GR support function and modifying the basic time and configuring Hello sessions between RSVP GR nodes are optional.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 117570

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next