No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the RSVP GR Helper Function

(Optional) Enabling the RSVP GR Helper Function


By being enabled with RSVP GR Helper, a device supports the GR capability of its neighbor.

RSVP GR takes effect on the RSVP GR-enabled neighbor automatically after the neighbor is enabled with RSVP GR. If the GR node's neighbor is a GR node, do not perform the following configurations. If the GR node's neighbor is not a GR node, perform the following configurations.

Perform the following configurations on GR Helper nodes.


  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-te hello support-peer-gr

    The function of RSVP GR Helper on the neighbor is enabled.

Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 129697

Downloads: 91

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next