No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Auto TE FRR

Configuring Auto TE FRR

Auto TE FRR is a local protection technique and is used to protect a CR-LSP against link faults and node faults. Auto TE FRR does not need to be configured manually.

Pre-configuration Tasks

Before configuring auto TE FRR, complete the following task:
  • Configure a dynamic MPLS TE tunnel. For details, see Configuring a Dynamic MPLS TE Tunnel.
  • Enable MPLS, MPLS TE and RSVP-TE in the system view and interface view of each node along a bypass tunnel.
  • Enable CSPF on a PLR.

Perform the operation of Configuring Dynamic BFD for RSVP to implement fast switching at the millisecond level.

Configuration Procedure

Except that configuring a TE FRR scanning timer, changing the PSB and RSB timeout multiplier, configuring auto bypass tunnel re-optimization, and configuring interworking with other vendors are optional, other configurations are mandatory.

Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 117388

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next