No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Dynamic MPLS TE Tunnel

Configuring a Dynamic MPLS TE Tunnel

Dynamic MPLS TE tunnels are set up using RSVP-TE signaling and are changed according to network changes. On a large-scale network, dynamic MPLS TE tunnels reduce the burden of per-hop configuration. Configuring a dynamic MPLS TE tunnel is the basis for configuring advanced features of MPLS TE.

Pre-configuration Tasks

Before configuring a dynamic MPLS TE tunnel, complete the following tasks:

  • Configure an IGP to ensure reachable routes between nodes.

  • Configure an LSR ID for each node.

  • Enable MPLS globally on each node.

  • Enable MPLS on each interface of each node.

Configuration Procedure

Except that configuring link bandwidth, referencing the CR-LSP attribute template to set up a CR-LSP, and configuring tunnel constraints are optional, all the other configurations are mandatory.

Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 117909

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next