No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting LDP

Resetting LDP


  • Resetting LDP may temporarily affect the reestablishment of the LSP. Exercise caution when you reset LDP.

  • Resetting LDP is prohibited during the LDP GR.


  • Run the reset mpls ldp command to reset configurations of the global LDP instance in the user view.
  • Run the reset mpls ldp all command to reset configurations on all LDP instances in the user view.
  • Run the reset mpls ldp peer peer-id command to reset a specified peer in the user view.
Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 117512

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next