No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R011C10

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Inter-AS Seamless MPLS Plus HVPN Configuration

Verifying the Inter-AS Seamless MPLS Plus HVPN Configuration


Inter-AS seamless MPLS+HVPN has been configured.


  • Run the display bgp vpnv4 all peer command on an AGG or MASG to check BGP peer relationship information.
  • Run the display bgp vpnv4 all routing-table command to check the VPNv4 routing table on an AGG or MASG.
  • Run the display bgp routing-table label command on an AGG, AGG ASBR, core ASBR, or MASG to check label information of IPv4 routes.
  • Run the display ip routing-table vpn-instance vpn-instance-name command to check the VRF table on an AGG or MASG.
Updated: 2019-10-18

Document ID: EDOC1000178315

Views: 117577

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next