No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Self-Signed Certificate

Configuring a Self-Signed Certificate

Context

If a device fails to request a local certificate from the CA, it can generate a self-signed certificate. The generated certificate is saved in storage as a file and issued to a PKI entity. You can export the certificate and transfer it to another device.

NOTE:

A device does not support lifecycle management (such as certificate update and revocation) over its self-signed certificate. To ensure security of the device and certificate, you are advised to replace the self-signed certificate with the local certificate.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run pki create-certificate self-signed filename file-name

    A self-signed certificate is created.

    During the configuration, you will be prompted to enter the certificate information, such as PKI entity attributes, the certificate file name, the certificate validity period, and length of the RSA key pair.

    The file format of the created self-signed certificate is PEM.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 146252

Downloads: 79

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next