No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying ACL Resources

Displaying ACL Resources

Context

If the device prompts that an ACL fails to be applied, the available ACL resources in the system may be insufficient.

You can view ACL resource usage in the system to check whether the ACL resources have been used up.

Procedure

  • Run the display acl resource [ slot slot-id ] command in any view to check information about ACL resources.

    If the value of Rule Free or Free is not 0, idle ACL resources exist on the device.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 136328

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next