No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring ARP Running Status

Monitoring ARP Running Status

Procedure

  • Run the display arp packet statistics command to display ARP packet statistics.
  • Run the display arp anti-attack statistics check user-bind interface interface-type interface-number command to display statistics on discarded ARP packets that do not match any binding entry on an interface.
  • Run the display arp anti-attack packet-check statistics command to display statistics on invalid ARP packets that are filtered out in ARP packet validity check.
  • Run the display arp anti-attack arpmiss-record-info [ ip-address ] command to display information recorded for ARP Miss rate limiting.
  • Run the display arp flood statistics command to display statistics on ARP Request packets on VLANIF interfaces of all super-VLANs.
  • Run the display arp optimized-reply status command to display the status of the optimized ARP reply function.
  • Run the display arp optimized-reply statistics [ slot slot-id ] command to display statistics on optimized ARP Reply packets.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 145621

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next