No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Gratuitous ARP Packet Sending

Gratuitous ARP Packet Sending

As shown in Figure 7-7, an attacker forges the gateway address to send a bogus ARP packet to UserA. UserA then records an incorrect ARP entry for the gateway. As a result, the gateway cannot receive packets from UserA.

Figure 7-7  Bogus gateway attack

To avoid the preceding problem, configure gratuitous ARP packet sending on the gateway. Then the gateway sends gratuitous ARP packets at intervals to update the ARP entries of authorized users so that the ARP entries contain the correct MAC address of the gateway.

Updated: 2019-10-18

Document ID: EDOC1000178319

Views: 151289

Downloads: 82

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next