No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Attack Source Information

Clearing Attack Source Information

Context

Before collecting updated statistics on attack sources, run the following command in the system view to clear the existing statistics.

The cleared attack source information cannot be restored. Exercise caution when you use the command.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the reset auto-defend attack-source [ history ] [ slot slot-id ] command to clear information about the attack sources on the main control board or a specified LPU.
  3. Run the reset auto-defend attack-source trace-type { source-mac [ mac-address ] | source-ip [ ipv4-address | ipv6 ipv6-address ] | source-portvlan [ interface interface-type interface-number vlan-id vlan-id [ cvlan-id cvlan-id ] ] } [ slot slot-id | mcu ] command to clear statistics on attack source tracing based on source MAC addresses, source IP addresses, or source ports + VLANs.
Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178319

Views: 152343

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next