No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Identify an Attack and How Can I Prevent Attacks?

How Can I Identify an Attack and How Can I Prevent Attacks?

You can detect common attacks as follows:

  1. Clear statistics on the packets sent to the CPU.

  2. Wait for one minute and check the number of packets sent to the CPU and discarded protocol packets, such as ICMP, TTL, Expired, SSH, and FTP. If there are a lot of packets sent to the CPU or discarded, an attack, such as ICMP attack, TTL Expired attack, SSH attack, or FTP attack, may occur.

  3. Find out the attack source through IP source trail or attack source tracing.

After locating the attack source, run the cpu-defend policy command to configure the blacklist to prevent the packets from this source entering the control plane. Alternatively, you can configure the penalty action in auto-defend to discard attack packets.

Additionally, the device can restrict the rate of ICMP packets from the source, or use traffic policy to discard SSH and FTP attack packets.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178319

Views: 151501

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next