No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for MFF

Licensing Requirements and Limitations for MFF

Involved Network Elements

Other network elements are not required.

Licensing Requirements

MFF is a basic feature of a switch and is not under license control.

Version Requirements

Table 4-1  Products and versions supporting MFF

Product

Product Model

Software Version

S7700

S7703, S7706 and S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10

S9700

S9703, S9706 and S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • MFF can be enabled in a maximum of 512 VLANs on the X series cards, E series cards (excluding EH1D2X48SEC0 card on S9700), BC card, ACU2 card, and 64 VLANs on other cards.

  • When the number of MFF-enabled VLANs reaches the limit, the MFF function can still be enabled in other VLANs if there are ample ACL resources on the device.

  • To improve security, you are advised to perform the following configurations when configuring MFF:
    • Configure DAI in the corresponding VLAN.
    • Configure static binding entries for users connected to the device. (Run the user-bind static ip-address start-ip to end-ip command in the system view to configure static binding entries for all users connected to the device.)
    • Configure the network-side interface as a trusted interface.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 135977

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next