No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of MPAC

Overview of MPAC

Definition

The Management Plane Access Control (MPAC) feature protects network device security. Network devices use the MPAC policies to filter the packets to be sent to the CPUs and discard the unexpected packets to prevent malicious attacks.

Purpose

On an enterprise network, user-side interfaces need to send a large number of packets to the CPUs of network devices. The frequently sent packets may be attack packets targeting at CPUs. If excess packets are sent to the CPU of a device, the CPU usage becomes high and CPU performance deteriorates. In this case, services cannot be processed in a timely manner. Even worse, the malicious packets will cause a system breakdown.

An MPAC policy matches packets to be sent to the CPU and discards undesired packets. The main purpose of MPAC is to protect TCP/IP-based control plane against Denial of Service (DoS) attacks. For example, when an attacker continuously sends packets to a network device by simulating a routing protocol, the device is overloaded by the attack packets, causing a high CPU usage. An MPAC policy can match the packets to be sent to the CPU against certain rules and discard undesired packets.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 137216

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next