No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Detecting Client Locations Through an LDRA

Detecting Client Locations Through an LDRA

An LDRA-enabled device can record client location information and forward the information to the DHCPv6 server. The DHCPv6 server then assigns IP addresses, accounting policies, and access control policies to the clients based on the client location information.

In Figure 9-9, users obtain IPv6 addresses through DHCPv6. The administrator wants to restrict the network access rights of the users on interface1 to improve network security.

Figure 9-9  LDRA application

In the traditional process of allocating IPv6 addresses, the DHCPv6 server cannot obtain the physical locations of clients. Therefore, the server cannot assign specified IP addresses or policies to users on a certain interface.

To solve this issue, the administrator enables DHCP snooping and LDRA on the Switch. The Switch can then obtain the location information of clients and forward the information to the DHCPv6 server. The server assigns IP addresses and security policies to clients based on the client location information.

The LDRA function records only the client location information and forwards the information to the DHCPv6 server through Relay-Forward messages. The differentiated policies for IP address allocation, accounting, and access control are configured on the DHCPv6 server.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178319

Views: 149944

Downloads: 82

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next