No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing and Releasing a Peer Certificate

Importing and Releasing a Peer Certificate


In the digital envelope authentication mode, the device as the data sender must have the receiptant's public key configured. Importing a peer certificate is a method to obtain the public key of a peer entity. This method connects the user identity information to the public key. It has high security and is applicable to large networks.

If the imported peer certificate is not used, release the certificate.


  • Import the peer certificate
    1. Run system-view

      The system view is displayed.

    2. Run pki import-certificate peer peer-name { der | pem | pkcs12 } filename [ filename ]

      Or run pki import-certificate peer peer-name pkcs12 filename filename password password

      The peer certificate is imported to the device memory.

  • Release the peer certificate
    1. Run system-view

      The system view is displayed.

    2. Run pki release-certificate peer { name peer-name | all }

      The peer certificate is released.

Verifying the Configuration

Run the display pki peer-certificate { name peer-name | all } command to check the imported peer certificate.

Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 146134

Downloads: 79

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next