No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application in SSH

Application in SSH

On the network shown in Figure 17-10, an SSH client securely logs in to the web page of the SSH server and manages network devices on web. To improve security of SSH connections, the CA trusted by SSH client and server issues local certificates. The communicating parties verify the certificates of each other, and set up an SSH connection only when the certificate verification is successful. This avoids potential attacks.

Figure 17-10  PKI application in SSH

The SSH client and server make the following interaction during SSL connection setup:

  1. The client and server apply for local certificates from the PKI authentication center.
  2. The PKI authentication center issues local certificates to the client and server.
  3. The client sends an SSH connection request to the server and sends its own local certificate to the server.
  4. After verifying the local certificate from the client, the server sends an SSH connection request and its own local certificate to the client.
  5. After verifying the local certificate from the server, the client sends the verification result to the server. The SSH connection is set up.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 137116

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next