No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling Timed Gateway Address Detection

(Optional) Enabling Timed Gateway Address Detection

Context

On a live network, services may be interrupted for a long time because the MFF-enabled device cannot immediately detect changes to the gateway MAC address. Timed gateway detection can solve this problem. With the timed gateway address detection function, which is enabled by default on all MFF-enabled devices, a device scans recorded gateway information every interval-time seconds. For each gateway recorded, the MFF-enabled device uses information about any user to construct an ARP request packet and sends it to the network interface. The MFF-enabled device then learns the gateway MAC address from the ARP reply packet. If the gateway MAC address has changed, the MFF-enabled device immediately updates the gateway information and broadcasts gratuitous ARP packets to user devices, so that user devices can update the gateway address.

NOTE:

If a gateway fails, traffic between users will be blocked. To avoid this situation, the device considers a gateway invalid if it does not receive a response from the gateway after five detection attempts. The device then deletes the MAC address entry of the invalid gateway. If the gateway detection interval is changed during a detection, the number of detection times is accumulated.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vlan vlan-id

    The VLAN view is displayed.

  3. Run mac-forced-forwarding gateway-detect [ interval interval-time ]

    The timed gateway detection is enabled and gateway detection interval is set.

    By default, the timed gateway detection is enabled and the default gateway detection interval is 30s.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 142521

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next