No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for SAVI

Licensing Requirements and Limitations for SAVI

Involved Network Elements

Other network elements are not required.

Licensing Requirements

SAVI is a basic feature of a switch and is not under license control.

Version Requirements

Table 13-1  Products and versions supporting SAVI

Product

Product Model

Software Version

S7700

S7703, S7706, S7712

V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10

S9700

S9703, S9706, S9712

V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10
NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • Enable ND snooping, DHCPv6 snooping, and IP source guard if invalid IPv6 data packets need to be filtered out
  • Run the nd snooping check enable command to enable ND protocol packet validity check if invalid ND protocol packets need to be filtered out
  • Configure defense against bogus DHCP message attacks if invalid DHCPv6 protocol packets need to be filtered out. For details, see "Configuring Defense Against Bogus DHCP Message Attacks" in DHCP Snooping Configuration in the "Configuration Guide - Security" of the corresponding product version.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 145756

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next