No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP Learning Triggered by DHCP

ARP Learning Triggered by DHCP

When many DHCP users connect to a network device, the device needs to learn and maintain many ARP entries. This affects device performance.

To address this issue, configure ARP learning triggered by DHCP on the gateway. When the DHCP server allocates an IP address for a user, the gateway generates an ARP entry for the user based on the DHCP ACK packet received on the VLANIF interface. Ensure that DHCP snooping has been enabled before using ARP learning triggered by DHCP.

You can also configure DAI to prevent ARP entries of DHCP users from being modified maliciously.

Updated: 2019-09-23

Document ID: EDOC1000178319

Views: 149979

Downloads: 82

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next