No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S7700 and S9700 V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for IPSG

Application Scenarios for IPSG

IPSG is used on campus networks to prevent network access from hosts using stolen IP addresses.

Figure 12-9 shows a typical campus network. For most campus networks:

  • If a campus network is small, the hosts and printers use static IP addresses.
  • If a campus network is large, the hosts obtain IP addresses through DHCP and some printers use static IP addresses.

IPSG is configured on the switches (Switch_1 and Switch_2) to which users connect.

Figure 12-9  Typical IPSG networking

Scenario 1: IPSG prevents access of the hosts who change their IP addresses

  • Hosts can only use the IP addresses allocated by the DHCP server or static IP addresses configured by the administrator to access the network. If a host changes its IP address without permission, the host cannot access the network. This prevents hosts from obtaining network rights without permission.
  • Static IP addresses configured for the printers can only be used by printers, and cannot be used by hosts to access the network.

Scenario 2: IPSG prevents access of unauthorized hosts (static IP addresses are used on the network)

  • Each host can only connect to a fixed port and cannot change the access location. The traffic rate on ports is limited.
  • Users cannot access the intranet with their own computers. This prevents intranet resource leaks.

If hosts obtain IP addresses through DHCP, NAC (such as Portal or 802.1X authentication) can be configured to prevent unauthorized host access.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178319

Views: 137084

Downloads: 78

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next