No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
License

License

This section describes the functions of loading license files and displaying license status.

Context

You need to activate licenses in either of the following situations:
  • Purchasing a license to obtain permissions on related functions after you purchase a new device.
  • Applying for a new license file, and upgrading and loading the license file when the license file is loaded on the device and a new feature is required.
NOTE:

This node is only available in the NAC unified mode.

Procedure

  • Configure the license as follows:
    1. Choose Maintenance > System Maintenance > License to access the License page, as shown in Figure 7-1.

      Figure 7-1  License

      Table 7-1 describes the parameters on the page.

      Table 7-1  Parameters on the License page

      Item

      Description

      License status

      • not loaded: default status. By default, a license is not loaded after the system starts or when it is invalid.

      • Normal: A commercial license enters the Normal state after it is loaded.

      • Trial: A license enters the Trial state when the loaded ESN does not match the license or after the license expires.

      • Demo: A temporary license enters the Demo state after it is loaded.

      • Emergency: When a license enters the Emergency state, dynamic resources on the device are free from the license controls. That is, the device runs with the maximum configurations of dynamic resources. A license can remain in Emergency state for at most seven days. After seven days, the license enters the original state.

      License revocation code

      This item is displayed only when an invalid license file exists in the system.

      Function Control Items

      Displays the names of function control items.

      Current Status

      Displays the control item status.

      Resource Control Items

      Displays the names of resource control items.

      Current Device Quantity/Specifications

      Displays resource usage ratio.

      Revoke

      Revokes the current license file.

      License file

      Allows you to select the license file to be uploaded.

    2. Click in Load License and select the license file to be uploaded.
    3. Click Activate to activate the license file.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84095

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next