No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SSID Profile

SSID Profile

Context

An SSID profile is mainly used to configure STA association and access parameters based on SSIDs, including the SSID name, STA association timeout period, legacy terminal access, and QoS CAR.

Procedure

  • Create an SSID profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > SSID Profile. The SSID Profile List page is displayed.
    2. Click Create. The Create SSID Profile page is displayed.
    3. Enter the name of the new SSID profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new SSID profile is displayed.



    5. Set parameters for creating an SSID profile. Table 9-2 describes the parameters for creating an SSID profile.

      Table 9-2  Parameters for creating an SSID profile

      Parameter

      Description

      SSID Profile

      Name of the SSID profile, which cannot be modified.

      SSID

      Name of the SSID.

      NOTE:

      When command lines are used to configure an SSID name containing non-English characters, the non-English characters can only be edited using the command editor of the UTF-8 encoding format.

      Association timeout

      STA association timeout period. If an AP receives no data packet from an STA in a continuous period of time, the STA goes offline after the association timeout period is reached.

      Maximum number of STAs

      Maximum number of access STAs on a single VAP.

      Hide SSID after the maximum number of STAs is reached

      Whether to hide SSIDs when the number of users on a VAP reaches the maximum.

      Disable non-HT terminal access

      Whether to disable non-HT terminal access.

      802.11r
      802.11r fast roaming Whether to enable the 802.11r function.
      Re-association timeout interval Reassociation timeout period.
      EDCA Parameters

      Area

      Preset EDCA parameters for different scenarios. Users can select the corresponding scenarios or adjust the preset EDCA parameters.

      • User-defined: EDCA parameters use default settings.
      • Voice: Voice packets preferentially use a channel.
      • Voice and video: Voice and video packets preferentially use a channel.

      Packet Type

      Packet type.
      • AC_VO: Voice
      • AC_VI: Video
      • AC_BE: Best Effort
      • AC_BK: Background

      AIFSN

      Arbitration inter frame spacing number (AIFSN), which determines the channel idle time. A larger AIFSN value indicates that the STA must wait for a longer time and has a lower priority.

      ECWmin

      Exponent form of the minimum contention window (ECWmin) and exponent form of the maximum contention window (ECWmax) together determine the average backoff time. Larger ECWmin and ECWmax values indicate that the average backoff time for the STA is longer and the STA priority is lower.

      ECWmax

      TXOPLimit

      Transmission opportunity limit (TXOPLimit), which determines the maximum duration in which an STA can occupy the channel. A larger TXOPLimit value indicates that the STA can occupy the channel for a longer time.

      Inbound CAR Parameters

      CIR

      Average rate of traffic that can pass through in the inbound direction.

      PIR

      Maximum rate of traffic that can pass through in the inbound direction.

      CBS

      Average volume of committed burst traffic that can pass through in the inbound direction.

      PBS

      Maximum volume of burst traffic that can pass through in the inbound direction.

      Admin Frame Expense Optimization

      Beacon frame rate on 2.4G radio

      Rate at which 2.4 GHz Beacon frames are sent.

      Beacon frame rate on 5G radio

      Rate at which 5 GHz Beacon frames are sent.

      Deny broadcast probe

      Whether to disable an AP from responding to broadcast Probe Request frames.

      Probe response retry

      Number of times Probe Response packets ate retransmitted.

      Others

      DTIM interval

      Number of Beacon frames sent before the Beacon frame that contains the DTIM.

      Hide SSID

      Whether to enable SSID hiding in Beacon frames.

      U-APSD power saving mode

      Whether to enable U-APSD.

      AP name broadcast Whether to enable Beacon frames to carry the AP name.
      MU-MIMO Whether to enable MU-MIMO.
      MU-MIMO enhancement Whether to enable MU-MIMO enhancement.

    6. Click Apply.
  • Modify an SSID profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > SSID Profile. The SSID Profile List page is displayed.
    2. Click the name of the SSID profile that you want to modify. The SSID profile configuration page is displayed.
    3. Set parameters for modifying an SSID profile. Table 9-2 describes the parameters for modifying an SSID profile.
    4. Click Apply.
  • Delete an SSID profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > SSID Profile. The SSID Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > SSID Profile. The SSID Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 85184

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next