No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AAA Service App

AAA Service App

This section describes the AAA configurations.

NOTE:

This node is only available in the NAC unified mode.

Wired Interface Authentication

This section describes how to apply an authentication profile to interfaces.

Procedure

  • Physical Interface Authentication
    1. Choose Configuration > Security Services > AAA Service App and click the Wired Interface Authentication tab, as shown in Figure 5-162.

      Figure 5-162  Wired Interface Authentication

    2. Select an interface.
    3. Select an authentication profile from Authentication profile to bind to an interface.
    4. Click Apply.
  • VLAN Authentication
    1. Choose Configuration > Security Services > AAA Service App and click the Wired Interface Authentication tab, as shown in Figure 5-162.
    2. Click to select VLAN ID.
    3. Select an authentication profile from Authentication profile to bind to a vlan.
    4. Click Apply.

Wireless Interface Authentication

Procedure

  1. Choose Configuration > Security Services > AAA Service App. Click the Wireless Interface Authentication tab, as shown in Figure 5-163.

    Figure 5-163  Wireless Interface Authentication tab

  2. Select an AP group.
  3. Select a VAP.
  4. Select an authentication profile.
  5. Click Apply.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 87916

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next