No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Web-based Configuration Guide
S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network

Network

The EasyDeploy function simplifies network configuration and implements remote deployment and centralized management of network devices.

To configure the EasyDeploy function, determine roles of devices first. After a device is configured as the Commander, you can view client information, configure and upgrade clients, and view power consumption of the device and the entire network on the Commander.

The network area is available only in the stand-alone mode.

If the topology function is not enabled on the Commander, the Summary, Deployment, and Batch Configuration menus are not available.

Translation
Download
Updated: 2020-02-04

Document ID: EDOC1000178323

Views: 102600

Downloads: 124

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next