Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network
The EasyDeploy function simplifies network configuration and implements remote deployment and centralized management of network devices.
To configure the EasyDeploy function, determine roles of devices
first. After a device is configured as the Commander, you can view
client information, configure and upgrade clients, and view power
consumption of the device and the entire network on the Commander. ![]()
NOTE:
NOTE: The network area is available only in the stand-alone mode.
If the topology function is not enabled on the Commander, the , , and menus are not available.
- Role Configuration
Before configuring EasyDeploy on a device, determine the role of the device. - Summary
On the Summary page, you can view the network topology and device information, and save topology information on the device. - Deployment
On the Commander, you can perform unconfigured client deployment, faulty client replacement, and batch client configuration based on topology information. - Batch Configuration
On the Commander, you can issue a command script to specified clients to complete batch configuration of the clients. - Power Consumption
On the Commanders, you can view the power consumption trend on the network and power consumption of a specific device.
Previous
