No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP-Ping

AP-Ping

Context

Using the AP-Ping tool, you can check connectivity between an AP and network device.

After an AP-Ping operation is complete, the AP-Ping result is displayed on the AP-Ping page.

NOTE:

Before you use the AP-Ping tool, ensure that the AP is properly online and has an IP address configured.

This node is only available in the NAC unified mode.

Procedure

  1. Choose Diagnosis > Diagnostic Tools > AP-Ping. The AP-Ping page is displayed.



  2. Set AP-Ping parameters. For description of the parameters, see Table 6-6.

    Table 6-6  AP-Ping parameters
    Parameter Description

    AP name

    AP name used in an AP-Ping operation.

    IP address/host name

    Domain name or IP address of the destination host.

    Packet transmission times

    Number of times ICMP Echo Request packets are sent.

    Packet length

    Length of an ICMP Echo Request packet excluding the IP header and ICMP header.

    Waiting time

    Time to wait before sending the next ICMP Echo Request packet.

    Timeout period

    Timeout period for an ICMP Echo Response packet.

  3. Click Start.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 87844

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next