No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


To enable the Commander to manage clients, specify the Commander IP address and port number on the clients.


  1. Click Network in the function area to display the Network page.
  2. Click Role Configuration in the navigation tree to display the Role Configuration page.
  3. Click the Client option button, as shown in Figure 8-3.

    Figure 8-3  Role Configuration

  4. Enter the Commander IP address and UDP port and select whether to enable the network topology collection function. The Commander IP address you enter here must be the same as that configured on the Commander. If you keep the UDP port blank, the default UDP port is used.
  5. Click Apply.

    After you click Apply, the Summary, Deployment, Batch Configuration, and Power Consumption nodes disappear from the navigation tree. These functions are supported only on the Commander and are hidden for clients.


    After completing the client configuration, you can click Go to commander web NMS to view Commander information or configure the Commander.

Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 87332

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next