No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Addition

AP Addition


  • Configure ports that connect ASs to APs.
    1. Choose Configuration > SVF Quick Config > AP Addition. Click the Configure Ports Connected to APs tab.

      Figure 5-20  Configuring ports that connect ASs to an AP

    2. Set AS Name to the added ASs and click Add All or Add Selected. All ports connecting the ASs to the AP are added in the list.
    3. Expand Pass VLAN. Set VLAN ID for the ports and click Apply. VLANs are configured for the ports.
  • Configure APs.
    1. Choose Configuration > SVF Quick Config > AP Addition. Click the Configure APs tab.

      Figure 5-21  Configuring APs

    2. Click Create to manually add APs one by one or batch import APs offline.
    3. Select APs in the list and click Delete. The APs are deleted.
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 93065

Downloads: 123

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next