No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Backing Up the Configuration File

Example for Backing Up the Configuration File

Networking Requirements

In Figure 10-1, back up the configuration file of the switch to a file server, so that the configuration file can be restored if the switch is damaged unexpectedly. Additionally, the configuration file can be downloaded from the file server to the switch if incorrect configurations cause abnormal functions.
Figure 10-1  Networking diagram of backing up the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Save the configuration file.
  2. Back up the configuration file.

Procedure

  1. Click Save in the upper right corner to save configurations on all pages to the current configuration file.
  2. Choose Maintenance > System Maintenance > System > File Management. The File Management page is displayed, as shown in Figure 10-2.

    Figure 10-2  File Management page

  3. Click in the line of the vrpcfg.zip configuration file, and specify the directory to which the configuration file is to be backed up.

Result

After the configuration file is backed up, query the backup file on the file server.

Follow-up Procedure

To restore the backup configuration file on the switch, upload the file on the File Management page. Then on the Upgrade page, specify the backup configuration file as the configuration file for the next startup and click Apply.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84292

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next