Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Diagnosis
This section describes the maintenance and diagnostic commands.
- Intelligent Diagnosis
- One-Click Information Collection
The one-click information collection function enables you to collect information on a device, including the configuration, logs, and errors. - Wireless Packet Capturing
- Ping
The ping command is used to check network connectivity and host reachability. - Trace Route
You can use the tracert command to test the gateways that packets pass through from the source host to the destination host. The tracert command is used to check network connectivity and locate network faults. - AAA Test
The AAA test tool is used to check whether the user can pass the RADIUS authentication. - RF-Ping
- AP-Ping
- Interference Detection
- Trace User/AP
- Configuration Check
Previous
