No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Authentication-free Rule Profile

Authentication-free Rule Profile

Procedure

  • Create a common authentication-free rule.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication-free Rule Profile. The Authentication-free Rule Profile List page is displayed.
    2. Click the authentication-free rule profile default_free_rule. The authentication-free rule page is displayed.
    3. Set Control mode to Authentication-free Rule.
    4. On Authentication-free Rule List, click Create. The Create Authentication-free Rule page is displayed, as shown in Figure 9-4.

      Figure 9-4  Parameters for creating an authentication-free rule

      Table 9-8 describes the parameters on the page.

      Table 9-8  Parameters for creating an authentication-free rule

      Parameter

      Description

      Rule ID

      ID of the authentication-free rule.

      This parameter cannot be set when Authentication-free is selected.

      Source IP

      Source IP address in the authentication-free rule. If Specified is specified, the IP address and mask need to be configured.

      This parameter cannot be set when Authentication-free is selected.

      Mask

      The mask and IP address specify a network segment.

      This parameter cannot be set when Authentication-free is selected.

      Destination IP

      Destination IP address in the authentication-free rule. If Specified is specified, the IP address and mask need to be configured.

      This parameter cannot be set when Authentication-free is selected.

      Mask

      The mask and IP address specify a network segment.

      This parameter cannot be set when Authentication-free is selected.

      Protocol type

      Type of the protocol that users are allowed to access.

      This parameter cannot be set when Authentication-free is selected.

      This parameter can be set only when Destination IP is set to Specified.

      Destination port number

      Destination port number that users are allowed to access.

      This parameter cannot be set when Authentication-free is selected.

      This parameter can be set only when Protocol type is set to TCP or UDP.

    5. Set the parameters and click OK.
  • Modify a common authentication-free rule.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication-free Rule Profile. The Authentication-free Rule Profile List page is displayed.
    2. Click the authentication-free rule profile default_free_rule. The authentication-free rule page is displayed.
    3. Set Control mode to Authentication-free Rule.
    4. Click the authentication-free rule to modify. The page for configuring the authentication-free rules is displayed.
    5. Modify an authentication-free rule. For description of the parameters, see Table 9-8.
    6. Click OK.
  • Delete a common authentication-free rule.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication-free Rule Profile. The Authentication-free Rule Profile List page is displayed.
    2. Click the authentication-free rule profile default_free_rule. The authentication-free rule page is displayed.
    3. Set Control mode to Authentication-free Rule.
    4. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Creating an ACL-defined authentication-free rule
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication-free Rule Profile. The Authentication-free Rule Profile List page is displayed.
    2. Click the authentication-free rule profile default_free_rule. The authentication-free rule page is displayed.
    3. Set Control mode to ACL, as shown in Figure 9-5.

      Figure 9-5  Creating an ACL-defined authentication-free rule

    4. Click . In the dialog box that is displayed, select an ACL.
    5. Click Apply.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication-free Rule Profile. The Authentication-free Rule Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 87432

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next