No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WDS Profile

WDS Profile

Procedure

  • Create a WDS profile.
    1. Choose Configuration > Wireless Services > Profile > WDS > WDS Profile. The WDS Profile List page is displayed.
    2. Click Create. The Create WDS Profile page is displayed.
    3. Enter the name of the new WDS profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new WDS profile is displayed.



    5. Set parameters for creating a WDS profile. Table 9-25 describes the parameters for creating a WDS profile.

      Table 9-25  Parameters for creating a WDS profile

      Parameter

      Description

      WDS Profile

      Name of the WDS profile, which cannot be modified.

      WDS network bridge name

      WDS name, specified using a character string.

      WDS working mode

      WDS working mode, which can be the root mode, middle mode, or leaf mode.

      NOTE:

      After changing the WDS working mode in a WDS profile, reset the APs using the profile to make the changed WDS mode take effect.

      DHCP trusted port

      Whether to enable the DHCP trusted interface function.

      After the DHCP trusted interface function is enabled in a WDS profile, the AP receives the DHCP OFFER, ACK, and NAK packets sent by authorized DHCP servers and forwards the packets to STAs so that the STAs can obtain valid IP addresses and go online.

      MU-MIMO

      Whether to disable MU-MIMO.

      Tagged VLAN

      Tagged VLAN. To add a tagged VLAN, enter the tagged VLAN and click . A maximum of 256 VLANs can be added to a WDS profile. To delete a tagged VLAN, enter the tagged VLAN and click .

      After one or a group of VLANs is added to a WDS profile in tagged mode, the WDS link forwards only the packets with these VLAN IDs from STAs and peer APs.

      Management Frame Rate

      Beacon frame rate on 2.4G radio (Mbps)

      Transmit rate of 2.4 GHz Beacon frames.

      Beacon frame rate on 5G radio (Mbps)

      Transmit rate of 5 GHz Beacon frames.

    6. Click Apply. In the Info dialog box that is displayed, click OK.
  • Modify a WDS profile.
    1. Choose Configuration > Wireless Services > Profile > WDS > WDS Profile. The WDS Profile List page is displayed.
    2. Click the name of the WDS profile that you want to modify. The WDS profile configuration page is displayed.
    3. Modify parameters in the WDS profile. Table 9-25 describes the parameters for modifying a WDS profile.
    4. Click Apply. In the Info dialog box that is displayed, click OK.
  • Delete a WDS profile.
    1. Choose Configuration > Wireless Services > Profile > WDS > WDS Profile. The WDS Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > WDS > WDS Profile. The WDS Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

  • Configure the profiles that are referenced by the WDS profile.

    A WDS profile can reference the security profile and WDS whitelist profile.

    1. Choose Configuration > Wireless Services > Profile > WDS > WDS Profile. The WDS Profile List page is displayed. Click next to WDS Profile. The WDS profile name is displayed. Click next to the specified WDS profile to view the profiles that are referenced by the WDS profile.
    2. Click any profile referenced by the WDS profile. The configuration page of the referenced profile is displayed on the right. You can select another profile from the drop-down list and set the profile parameters. For descriptions of the profile parameters, see its configuration page.
    3. Click Apply. In the Info dialog box that is displayed, click OK.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 87347

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next