No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Authentication Scheme

Authentication Scheme

Procedure

  • Create an authentication scheme.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication Scheme. The Authentication Scheme List page is displayed.
    2. Click Create. The Create Authentication Scheme page is displayed.
    3. Enter the name of the new profile in Profile name.
    4. Click OK. The parameter setting page for creating an authentication scheme is displayed.



    5. Set parameters for creating an authentication scheme. Table 9-10 describes the parameters for creating an authentication scheme.

      Table 9-10  Authentication scheme parameters

      Parameter

      Description

      Authentication Scheme

      Name of the new authentication scheme, which cannot be modified.

      First authorization

      The value can be HWTACACS authentication, RADIUS authentication, Local authentication, or Non-authorization.

      Second authorization

      The value can be a mode except the first authorization mode. When the authorization server of the first authorization mode does not respond, the second authorization mode is triggered.

      When the first authorization mode is no authorization, the second authorization mode cannot be configured.

      Third authorization

      The value can be a mode except the first and second authorization modes. When the authorization servers of the first and second authorization modes do not respond, the third authorization mode is triggered.

      When the second authorization mode is no authorization or not configured, the third authorization mode cannot be configured.

      Fourth authorization

      The value can be no authorization or not configured. When the authorization servers of the first, second, and third authorization modes do not respond, the fourth authorization mode is triggered.

      When the third authorization mode is no authorization or not configured, the fourth authorization mode cannot be configured.

      NOTE:

      If non-authentication is configured, a user passes the authentication using any user name or password. Therefore, to protect the device or network security, you are advised to enable authentication, allowing only the authenticated users to access the device or network.

    6. Click Apply.
  • Modify an authentication scheme.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication Scheme. The Authentication Scheme List page is displayed.
    2. Click the authentication scheme to modify. The authentication scheme configuration page is displayed.
    3. Set parameters for modifying an authentication scheme. Table 9-10 describes the parameters for modifying an authentication scheme.
    4. Click Apply.
  • Delete an authentication scheme.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication Scheme. The Authentication Scheme List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Authentication Scheme. The Authentication Scheme List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84477

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next